The correct h01-1010-010 pump hyd gear 0.48 ci-rev is chosen based on its fixed displacement of 0.48 cubic inches per revolution, which matches the flow and pressure requirements of your system. This Hydraulic Gear Pump (P/N: H01-1010-010) is built for top drive systems like Canrig top drive 8035, 8050, and 6027. It provides constant fluid power at system continuous pressure and good volumetric efficiency exceeding 90%. Before you buy, examine shaft rotation, mounting flange, port layout, and fluid viscosity compatibility to prevent installation mistakes and system breakdowns.
Item number H01-1010-010 is a fixed-displacement external gear type pump. It moves 0.48 in3/rev, which is about 7.8 cc/rev. We used the old formula (Displacement X RPM)/231 to figure out that it pumps about 3.74 GPM at 1800 RPM. Because of this, it works well in situations that need a steady, moderate flow without the problems that come with a system that changes the volume.
Most housings are made of a high-tensile aluminum material that keeps heat in, with cast iron end plates that can handle heavy loads. It can be made from standard hydraulic fluid with a viscosity range of 150 to 300 SUS and meets SAE fitting standards. So, it is easy to add to hydraulic power units that are already in use.
Two interlocking gears inside a close-tolerance frame make this pump work. When the gears disengage, they make a low-pressure area at the entrance that pulls the fluid in. For the fluid to come out at the outlet, which is along the wall of the housing, pressure has to flow between the gears' teeth. The design makes the flow smooth and steady, with no pulses. For sensitive drilling control systems, this is a feature that is wanted.
H01-1010-010 is intended for oilfield top drive systems for Canrig hydraulic gear pump models 8035, 8050, and 6027. Oil and gas drilling. This pump type is also utilized in hydraulic power packs for industrial machinery, aerial work platforms, and material handling equipment where compact size and dependable pressure output are crucial.

It takes more than just looking for a part number to choose a hydraulic gear pump. When purchasing something, people have to think about a lot of linked factors to make sure the pump will work consistently in their specific setting.
Before placing your order, here are the most important things you should think about when making your choice:
And by comparing these features to your application data, you may lower the chance of using the wrong thing and having unplanned downtime on important digging operations.
The pump end plates are made of highly treated cast iron to resist bushing wear under load. For MRO price-conscious buying groups, a lower-quality pump often results in fewer replacement cycles and higher life cycle costs. Choose ISO recognized suppliers who can show (on request) the material standards and dimensional accuracies.
The pump will prematurely fail without a regular maintenance routine, even if properly designed. The H01-1010-010 hydraulic gear pump is a machine that is operated by scheduled maintenance and not by repairs.
Check the suction pipes for air leaks or restrictions every 250 operating hours. Cavitation, which occurs when there is insufficient fluid in the intake, creates a high-pitched scream and rapidly wears down the gear surfaces. Change hydraulic fluids and suction strainers as per your system OEM schedule and maintain fluid purity to ISO 4406 criteria to prevent premature gear wear.
The two most common difficulties with gear pumps in this displacement class are noise and loss of flow. Inflow line noise? Normally aeration or cavitation. Low flow output often indicates internal leakage from worn gear-to-housing clearances. If the volumetric efficiency drops below 85% under load, inspect the gear set and end-plates for wear. By replacing matched pieces, you regain efficiency without replacing the complete pump.
The number one reason for premature pump failure is improper installation. Flush the hydraulic circuit prior to installation to avoid pollution. Fill the pump housing with clean hydraulic fluid prior to starting to minimize damage from dry-running. Shaft bearing side-loading is a frequent issue. Check shaft coupling alignment to within production tolerances. This may greatly reduce bearing life.
When sourcing H01-1010-010 pump hyd gear 0.48 ci-rev for B2B procurement, supplier reliability is just as important as the specifications of the product. Total procurement cost is influenced by delivery dependability, quality documentation, and post-sale support.
If you are sourcing hydraulic gear pumps for important applications, always ask for ISO 9001 certification and inspection reports. Suppliers with ISO certification have established controls on manufacturing, from raw material input to testing the end product. This decreases the possibility of commissioning failure due to out-of-tolerance components.
If you operate Canrig hydraulic gear pump 8035, 8050, or 6027 top drives, having at least one H01-1010-010 in your spare parts inventory might save you from expensive rig downtime. In-stock suppliers are able to ship same-day or next day, eliminating the multi-week wait periods associated with special-order components. If your fleet size warrants stocking many units, negotiate bulk price levels.
For cost-conscious MRO purchasers, excellent replacement pump assemblies with the same dimensions and performance specs as the original unit provide a realistic alternative to full-price new pumps. Before substitution in field service, ensure that replacement parts have identical pressure ratings and dimensional tolerances.
Take a look at our buying decision guide to make sure you think about all of these important things before you buy the H01-1010-010 Hydraulic Gear Pump.
It has the same ports and attachment plate as your HPU. 150 to 300 SUS is the right range for fluid viscosity. At the moment, the supplier has ISO 9001 certification. Sure, we have enough in stock to send it to you when you need it. You can get tech support after the sale if you have any questions about how to set it up.
It's not enough to just match the part number to get the right h01-1010-010 pump hyd gear 0.48 ci-rev gear pump. Before you buy, make sure you know the unit's displacement per revolution (0.48 cubic inches), flow rate, 3,000 PSI constant pressure rating, shaft rotation, fitting measurements, port layout, and whether it works with hydraulic fluid. For Canrig 8035, 8050, and 6027 top drive systems, keeping fluids in check, inspecting them regularly, and installing them correctly all help keep the pumps working well and reduce unplanned downtime.
Working with a trustworthy supplier is important for both procurement teams and maintenance professionals. GMS offers the H01-1010-010 hydraulic gear pump, along with technical support and specifications for repairs and replacements.
CI-Rev stands for "cubic inches per rotation." It talks about how much fixed hydraulic fluid moves in the pump every time its gear set goes around all the way. In this case, 0.48 means that the pump moves 0.48 cubic inches of liquid every turn, which is equal to 7.8 cc per turn. With this number, you can start to figure out the flow rate at any given RPM.
The H01-1010-010 hydraulic gear pump can work with CARIG top drive types 8035, 8050, and 6027. You should always check the part number (P/N: H01-1010-010) against the equipment's parts list before you buy.
Check the input lines and flow strainers every 250 hours of use. As per the system's maintenance plan, change the hydraulic fluid when it's due. Also, keep an eye on the noise and flow of the output for early signs of wear inside the pump.
Most of the time, a high-pitched sound means that there is cavitation at the pump entrance. This could be because the suction strainer is clogged, the input hose is kinked, or the suction line has an air leak. This needs to be fixed right away, as cavitation causes gears to wear out quickly.
ISO VG 32 or ISO VG 46 oils are good for stopping wear and tear. When the machine is running, the fluid's viscosity should be between 150 and 300 SUS to protect the internal joints and keep the overall efficiency above 90%.
GMS has been selling spare parts for oil and gas pumping tools for over ten years. This pump is in stock at GMS and ready to ship right away. They are a trusted h01-1010-010 pump hyd gear 0.48 ci-rev provider. There is ISO 9001 approval for each unit to back it up. For prices, spec sheets, and technical help, our team gets back to you quickly. Send us an email at sales@gmssupply.com right away to get a quote.
1. Hydraulic Institute. Hydraulic Pump Standards and Selection Guidelines. Hydraulic Institute, 2020.
2. SAE International. SAE J745: Hydraulic Pump and Motor Test Procedures. SAE International, 2019.
3. ISO. ISO 4406: Hydraulic Fluid Power — Fluids — Method for Coding the Level of Contamination by Solid Particles. International Organization for Standardization, 2021.
4. Eaton Corporation. Gear Pump Engineering and Application Guide. Eaton Hydraulics, 2018.
5. Parker Hannifin Corporation. Industrial Hydraulic Technology: Fluid Power Basics and Circuit Design. Parker Hannifin, 2017.
6. Bosch Rexroth AG. Hydraulic Gear Pump Selection and Maintenance Manual. Bosch Rexroth, 2022.
Learn about our latest products and discounts through SMS or email